BrainFinch
Articles

The Stroop effect explained, with a game you can try

The Stroop effect is the delay you feel when you try to name the color a word is printed in and the word itself spells a different color. Seeing RED printed in blue ink and answering “blue” takes longer than it does when the word and the ink agree, and people make more errors. John Ridley Stroop described the effect in 1935, and psychologists have studied it ever since.

You can feel it in the game above. Color Clash shows a color word in colored ink and asks you to tap the ink color.

What is the Stroop effect?

The Stroop effect is interference between two sources of information that arrive together. The ink color is the one you have been asked to report. The word is the one you have been asked to ignore, and it gets read anyway.

Researchers use three kinds of items to measure it:

Item type Example What usually happens
Congruent RED in red ink Fast answers, few errors
Neutral A patch of red, or a non-color word in red ink In between
Incongruent RED in blue ink Slower answers, more errors

The size of the effect is the gap in speed between incongruent items and the others. The interference is lopsided. Naming the ink is slowed by the word, while reading the word aloud is hardly slowed by the ink.

What did Stroop’s 1935 paper show?

Stroop’s paper, “Studies of Interference in Serial Verbal Reactions”, reported three experiments, and the second one produced the result that carries his name. People took much longer to name the ink colors of a list of conflicting color words than to name the colors of a list of plain colored squares.

The first experiment asked for the opposite job. People read color words aloud, either printed in black or printed in a conflicting ink, and the ink made very little difference to their reading speed. The third experiment looked at practice. After several days of naming ink colors, people got faster at it and the interference shrank, though it did not go away.

Stroop used five colors: red, blue, green, brown and purple. He was building on older work. James McKeen Cattell had reported in 1886 that people name colors more slowly than they read the words for them. Colin MacLeod’s 1991 review in Psychological Bulletin covered more than fifty years of studies that followed Stroop’s paper.

Why does reading interfere with naming the ink color?

Reading interferes because, for a skilled reader, it is automatic. You do not decide to read a word in front of you. It is read before you can stop it, and now you have two answers ready where the task wants one.

Naming a color is less practiced. Adults read words all day and are rarely asked to say what color something is. So the word’s answer tends to arrive first or arrive stronger, and you have to hold it back while the color’s answer catches up. That holding back takes time, which is the delay you feel. When it fails, you say or tap the word, which is the typical Stroop error.

This also explains why the interference runs mostly one way. Color naming is the weaker habit, so it does little to disturb reading.

Automaticity is the best known account, though the details are still debated. MacLeod’s review compares several, including the idea that words are simply processed faster than colors. The accounts agree on the main point: a practiced skill is hard to switch off on request.

How does BrainFinch’s Color Clash work?

A color word such as RED appears on a card, printed in an ink that may be a different color, with a small shape in the same ink beside it. You tap the button below that matches the ink and ignore what the word says.

The rules:

  1. A round lasts 30 seconds.
  2. Each card you answer with the right ink color is one point, and a new card appears right away.
  3. A wrong tap scores nothing and freezes the buttons for a little over half a second.
  4. Mistakes take no points away, but they lower the accuracy shown at the end of the round.

A new player gets three answer buttons. Higher levels use four and then six colors: blue, red, green, yellow, purple and black. The buttons stay in the same places for the whole round. Words and inks disagree more often as the round goes on, so expect the last ten seconds to be harder than the first ten.

The original task was spoken aloud from a printed list. Color Clash asks for a tap, and it shows one card at a time, but the conflict between word and ink is the same.

How do you go faster at Color Clash?

The quickest route is to stop looking at the word, and the game gives you a way to do that. Each ink color always comes with the same shape, such as a blue circle or a red square. Matching the shape beside the word to a button lets you skip reading the word.

Learn the button positions early. The buttons do not move during a round, so once you know where each color sits you can keep your eyes on the card.

Guessing does not pay. A wrong tap freezes the buttons for more than half a second of a 30 second round, which makes a guess slower than a look. This matters most near the end, when words and inks disagree most often and a rushed tap tends to go to the word.

If your score rises as the button layout becomes familiar, that is practice on this game.

Which other games on the site use the same idea?

Two other BrainFinch games ask you to answer from one feature of the screen while another feature pulls the wrong way.

Arrow Focus is based on the flanker task, which Eriksen and Eriksen described in 1974. Five marks sit in a row, and you swipe the way the middle arrow points while the arrows on either side sometimes point the other way. A round lasts 30 seconds.

Simon Space puts an arrow on the left or right side of the screen. You swipe the way the arrow points, and the side it sits on does not matter. The pull toward answering on the side where something appears is known as the Simon effect, named after J. Richard Simon. A round lasts 25 seconds.

In all three games the fastest play comes from finding the one feature that carries the answer: the ink in Color Clash, the middle arrow in Arrow Focus and the arrowhead in Simon Space.

Common questions

What is the Stroop effect?

It is the slowdown that happens when you name the ink color of a word that spells a different color, such as the word RED printed in blue. People answer more slowly and make more errors than when the word and the ink agree.

Who discovered the Stroop effect?

John Ridley Stroop described it in his 1935 paper Studies of Interference in Serial Verbal Reactions, published in the Journal of Experimental Psychology.

Why does the Stroop effect happen?

The usual explanation is automaticity. Reading is so practiced that the word is read without any intent to read it, and that answer competes with the ink color you are trying to name.

Games in this article

Take all 62 games with you

The BrainFinch app plays offline, keeps your streak and reminds you when the daily challenge is ready.

Get it on Google Play