BrainFinch
Articles

Paper folding test: how to solve fold-and-punch puzzles

In a paper folding puzzle a square sheet is folded one or more times, a hole is punched through all the layers, and you choose how the sheet looks when opened flat. Each fold mirrors the holes across its crease. One punch through n folds therefore leaves up to 2^n holes.

The game above is Fold It. It plays the folds one picture at a time, punches the packet, and then shows four open sheets to choose from.

How does a fold-and-punch puzzle work?

You are shown the folds in order, then the folded packet with one or two punch marks on it. The punch goes through every layer under that spot. The answer options are drawings of the open sheet with holes in different places, and one of them is right.

Two things decide the answer: how many layers were under the punch, and where each of those layers sits in the open sheet.

What is the symmetry rule?

Opening a fold copies every hole to the other side of the crease, as a mirror image. The copy is the same distance from the crease as the original and directly across from it.

That gives the counting rule. Every fold that covers the punched spot doubles the layers there, so:

Folds under the punch Layers Holes from one punch
1 2 2
2 4 4
3 8 8

The count is “up to” 2^n because some puzzles use folds that cover only part of the sheet. A corner folded in, for example, adds a layer only where the corner lands. A punch elsewhere on that sheet is not doubled by it.

In Fold It every fold brings one whole half onto the other, so every fold counts and one punch always gives exactly 2, 4 or 8 holes.

How do you unfold step by step?

Work backward from the last fold to the first, and mirror the holes at each step.

  1. Start with the punched packet and note where the hole is in the open sheet’s own frame, for example “second row, third column”.
  2. Open the last fold. Find its crease. Copy each hole across the crease to the same distance on the other side.
  3. Open the fold before that. The crease is now in a different place, usually the middle of a larger area. Copy every hole you have so far across it, including the copies from step 2.
  4. Repeat until the sheet is flat.
  5. Count the holes and compare with the options.

The order matters because each crease is the middle line of whatever was showing when that fold was made. The last fold’s crease is the middle of a small packet. The first fold’s crease is the middle of the whole sheet.

Here is a puzzle from our generator, on a sheet of 4 by 4 cells with columns A to D from the left and rows 1 to 4 from the top.

The top half stays and the bottom half folds up onto it, leaving rows 1 and 2. Then the right half stays and the left half folds over, leaving columns C and D of those rows. A hole is punched at C2.

  • Open the second fold. Its crease runs between columns B and C. C2 is next to the crease, so its copy is B2.
  • Open the first fold. Its crease runs between rows 2 and 3. B2 and C2 are next to it, so their copies are B3 and C3.

The open sheet has four holes in a square at the center: B2, C2, B3 and C3.

The three wrong sheets in that puzzle show the usual errors. One had holes at C2 and C3, which forgets the second fold. One had B2 and C2, which forgets the first fold. The last had A2, C2, A3 and C3, the right number of holes with one pair slid sideways.

What mistakes do the wrong answers copy?

They copy the errors a person is likely to make. In Fold It the wrong sheets are built in five ways:

  • A fold is forgotten, so the sheet has half as many holes as it should.
  • The holes from the last fold are slid half a sheet across where they should be mirrored.
  • The whole correct pattern is flipped across the diagonal.
  • The whole correct pattern is turned a quarter turn.
  • One hole is moved to a neighboring cell.

Counting holes removes only some of these. We generated 3,000 puzzles at each step and looked at the wrong sheets.

Step Wrong sheets with the correct number of holes
0 to 1 70 percent
2 42 percent
3 60 percent
4 to 7 53 percent
8 and up 49 percent

So between 42 and 70 percent of the wrong sheets survive a hole count. After counting, check positions: every pair of holes must sit evenly on both sides of its crease.

Where does the paper folding test come from?

The Paper Folding Test is part of the Kit of Factor-Referenced Cognitive Tests, published by Educational Testing Service. The 1976 edition is credited to Ekstrom, French, Harman and Dermen.

ETS describes the kit as a set of 72 tests that mark 23 cognitive factors. Paper Folding is listed as the second of three tests under the Visualization factor, between the Form Board Test and the Surface Development Test. According to ETS, each test in the kit has two parallel parts.

The kit was made for research. The agreement that ETS asks users to sign calls the tests “research instruments not intended for use in selection or counseling”.

Online versions such as ours borrow the format: folds shown in order, a punch, and a set of open sheets to pick from. Our sheets are generated by code each round and none comes from the ETS test.

What fold sequences does Fold It use?

It uses one, two or three folds, each along the middle of what is showing. The sheet is 4 by 4 cells. A fold can run left to right or top to bottom, and either half can be the one that stays put.

We read the table from the game’s generator and listed every fold sequence the rules allow.

Step Folds Possible fold sequences Folded packet, in cells Punches Holes in the open sheet Wait before you can answer
0 to 1 1 4 4 by 2 or 2 by 4 1 2 0.9 seconds
2 to 3 2 16 4 by 1, 2 by 2 or 1 by 4 1 4 1.55 seconds
4 to 7 2 16 4 by 1, 2 by 2 or 1 by 4 2 8 1.55 seconds
8 and up 3 48 2 by 1 or 1 by 2 1 8 2.2 seconds

The step starts at the level saved for you and rises by one after every three sheets. A round lasts 50 seconds.

Two folds in the same direction make a strip one cell wide. Two folds in different directions make a 2 by 2 packet. Both give four holes per punch, but the patterns differ: the strip puts all four holes in one row or column, and the 2 by 2 packet puts them at the corners of a rectangle.

Three folds leave a packet of two cells. The game always keeps one cell of the packet unpunched, so at this stage there is a single punch and it becomes eight holes.

At steps 0 to 2 the wrong sheets lean toward forgotten folds, slides and turned patterns. From step 3 the one-cell near misses are mixed in evenly.

The answer tiles stay locked until the punch has been shown. The wait in the last column is a quarter of a second plus 0.65 seconds per fold.

How do you get faster at it?

Count first, then check one pair. With the counting rule you know the number of holes before the options appear, and the mirror check on a single pair usually separates the sheets that are left.

For strips, remember that all the holes share a line. For 2 by 2 packets, the holes form a rectangle centered on the sheet.

People get quicker at fold-and-punch puzzles with practice. That is a gain on this task, and the research on brain training has not shown that it spreads to other skills. A Fold It score counts the sheets you solved in 50 seconds.

Other spatial puzzles on the site: Cube Net asks which flat net folds into a cube, with all 11 nets described in our cube nets guide. Mirror Match is the mirror rule on its own, and Rotate It asks for a cube figure seen from another side.

Common questions

How do you solve a paper folding and hole punching puzzle?

Undo the folds in reverse order. Each time you open a fold, copy every hole to the other side of the crease as a mirror image, at the same distance from the crease.

How many holes do you get when you punch folded paper?

One punch through a sheet folded n times leaves up to 2 to the power n holes: 2 holes after one fold, 4 after two and 8 after three, as long as every fold covers the punched spot.

Where does the paper folding test come from?

The Paper Folding Test is one of the visualization tests in the Kit of Factor-Referenced Cognitive Tests, a set of research tests published by Educational Testing Service. The 1976 edition is by Ekstrom, French, Harman and Dermen.

How many folds does Fold It use?

One fold at first, then two, then three. Every fold halves what is showing of a square sheet, either left to right or top to bottom.

Sources

  1. Educational Testing Service. Kit of Factor-Referenced Cognitive Tests (1976 Edition), information sheet and order form.
  2. Ekstrom, R. B., French, J. W., Harman, H. H., & Dermen, D. (1976). Kit of Factor-Referenced Cognitive Tests. University of Plymouth psychometric test catalogue entry.
  3. Ekstrom, R. B., French, J. W., & Harman, H. H. (1979). Cognitive Factors: Their Identification and Replication. ETS research report listing.

Games in this article

Take all 62 games with you

The BrainFinch app plays offline, keeps your streak and reminds you when the daily challenge is ready.

Get it on Google Play